4Hawks Raptor XR Range Extender (Autel Evo)

$ 149.00

4Hawks antenna for Autel Evo model is highly advanced, operating in 2.4GHz frequency. The concept behind the look of the antenna was to make it look like it was a part of the drone by default. Entire construction is 100% UV protected to assure longevity of the equipment. Additionally, part of the construction is made of aluminum to make the whole construction as light as possible. Mounting is made of stainless steel for rock solid stability. The entire set is lightweight and uniform (without any loose equipment pieces). Changing the direction of the antenna shouldn’t cause any difficulties, as the system was designed in a way that allows quick position change with just a single “click”. This way you can be sure that you do not lose the connection with your drone.

 

Features:

  • Maximize performance
  • No modification to the drone itself
  • Long range extension without external boosters
  • Design does not contain any removable parts
  • Complete solution

     

    Autel Evo is perfect for holiday trips. Its long range allows its user to reach places that were earlier completely inaccessible, such as deep forests, canyons, lakes etc. Evo fits in well in every situation. The built-in camera allows recording videos in 4k.
    Separate-light-line.jpg

    Specification

    electrical & mechanical parameters of Raptor renge extender.

    Electrical parameters

    Frequencies
    Port 1:   2.40 - 2.50 GHz 
    Port 2:   2.40 - 2.50 GHz 
    Gain
    Port 1:   11 dBi  
    Port 2:   11 dBi 
    VSWR
    Port 1:   < 1.50  (max. < 2.00)
    Port 2:   < 1.50  (max. < 2.00)
    Beamwidth
    Port 1:   70°/40°
    Port 2:   70°/40° 
    Polarization
    Port 1:   Vertical
    Port 2:   Vertical
    Impedance
    Port 1:   50 Ω
    Port 2:   50 Ω

    Mechanical parameters

    Material
    Antenna:   Samsung ABS, polyurethane, aluminum, Stainless steel, Nylon, PTFE PCB
    Mounting:   Stainless steel + paint
    Weight
    ~ 520g (450g Antenna + 70g Mounting)
    Dimensions
    29.2 x 18.2 x 2.1 cm
    11.50 x 7.16 x 0.83 inch
    Connection
    Port 1:   RP-SMA female
    Port 2:   RP-SMA female
    Tilt adjustment
    3 tilt positions, OnClick system
    Mounting type
    On SMA connectors (Permanent)
    Separate-light-line.jpg

    In the box

    Range extender antenna

    Range extender antenna

    2x Dedicated for Mavic UFL pigtails

    2x Dedicated for Mavic UFL pigtails

    Stainless steel mounting kit

    Stainless steel mounting kit

    2x screwdriver (Torx T6 & Philips) + 8mm wrench

    2x screwdriver (Torx T6 & Philips) + 8mm wrench

    2x RP-SMA male RG316 black pigtails

    2x RP-SMA male RG316 black pigtails

    Additional Mavic tools
    Separate-light-line.jpg

    Plots

    VSWR, Separation between connectors & characteristic patter of Raptor antennas
    Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern.png
    Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern Azimuth.png
    Raptor SR for Spark 5.8 GHz Port 1 & Port 2, Radiation Pattern Azimuth.png
    Raptor SR for Spark Dual Band Port 1, VSWR.png
    Raptor SR for Spark Dual Band Port 1, Smith Chart.png
    Raptor SR for Spark Dual Band Port2-Port1, Port Isolation.png
    Raptor SR for Spark 2.4 GHz Port 1 & Port 2, Radiation Pattern Elevation.png
    Raptor SR for Spark 5.8 GHz Port 1 & Port 2, Radiation Pattern Elevation.png
    Raptor SR for Spark Dual Band Port 2, VSWR.png
    Raptor SR for Spark Dual Band Port 2, Smith Chart.png